How do I cut a 45 degree and straight cut on a wood particle laminate counter top without splitting?

Flip the top over, and cut from the under side.How do I cut a 45 degree and straight cut on a wood particle laminate counter top without splitting?
We have done this with a fine laminate saw. Mark both the top and the underside cut line. Cover the top side with masking tape. Turn over and cut from the bottom side. This should minimize any chipping. When done you can sand lightly with fine grade sand paper.





Getting your angle right is important.





For both jobs use a saw that has a laser light guide to ensure that you get a straight cut. Go slow and easy to ensure that you don't mess up the cut.How do I cut a 45 degree and straight cut on a wood particle laminate counter top without splitting?
You need a fine tooth laminate blade available at Lowe's. Use masking tape to cover your cut to help reduce chipping. Straight cut no problem but a 45 degree cut will be harder.. Are you making a miter joint?





Scott


http://www.wheresmydrink.com
not exactly sure how you are cutting this. but make sure the top surface when cutting is the top surface when installing. yo get a lot less tear out on the top of the board then you do the bottom.